CricketBot is a fast little Dual Drive robot. You can add extra RoboBloX to give CricketBot extra skills and abilities.
Blocks Required:
BrainBlock + PowerBlock + DriverBlock + 2 x GoBlocks + 2 x RollBlocks = CricketBot!
Place a RollBlock Wheel on each GoBlock (opposite sides)
Place one or two 2x10 plates across the two GoBlocks
Place the PowerBlock in the middle
Place one or two 2x8 or 2x10 plates across the bottom
Add a 2x3 or 2x2 plate to the middle of the PowerBlock
Mount the BrainBlock and Motor Driver onto the PowerBlock
Hot-Glue a marble into the bottom of a 2x2 Brick to create a front "wheel" nose for Jiminy
GoBot Test
GoBot Drive (Arduino Mode)
GoBot with Speed Control (Arduino Mode)
